中文|

首页 > 304永利官网入口 > 铸造设备 >

  • 迷你连续铸造机

    1、采用惰性气体保护熔解,防止金属氧化,动力牵引铸造方式,从而可将损耗降至最低。 2、短时间内铸造高密度黄金、K金、银等贵金属,如板形、圆条、方条、圆管及异形等规格产品。 3、采用下引法铸造,使型材内部沙孔控制在最低极限,铸造出的成品完全达到深加工要求。 4、高效独特的搅拌式感应加热,使功率增强,熔解金属成色均匀,铸造容量更大,铸造速度提升。
  • 设备简介:

    1、采用惰性气体保护熔解,防止金属氧化,动力牵引铸造方式,从而可将损耗降至最低。
    2、短时间内铸造高密度黄金、K金、银等贵金属,如板形、圆条、方条、圆管及异形等规格产品。
    3、采用下引法铸造,使型材内部沙孔控制在最低极限,铸造出的成品完全达到深加工要求。
    4、高效独特的搅拌式感应加热,使功率增强,熔解金属成色均匀,铸造容量更大,铸造速度提升。


    Equipment introduction:
    1、 Adopt inert gas to protect the melting, prevent metal oxidation, power traction casting method, which can minimize the loss.

    2、Cast high-density gold, K gold, silver and other precious metals in a short time, such as plate, round bar, square bar, round tube and special-shaped products.
    3、The down-drawing method is adopted to control the internal sand holes in the profile to the lowest limit, and the finished product completely meets the requirements for deep processing.
    4、Efficient and unique agitation induction heating, which enhances the power, uniformly dissolves the metal, increases the casting capacity, and increases the casting speed.

    技术参数 Specifications

    电源
    Power Supply
    380V/50HZ/60HZ/三相五线
    380V/50HZ/60HZ/Three-phase five-wire
     
     
     
     
    容量可根据客户需求定做
    Can be customized according to customer requirements
    容量
    Smelting Capacity
    2 KG 4 KG 6 KG
    输出功率
    Output Power
    10 KW 13 KW 15 KW
    铸造时间
    Melting Time
    6-10分钟
    6-10 Mins
    8-12分钟
    8-12 Mins
    8-15分钟
    8-15 Mins
    最高温度
    Max Temperature
    1450℃
    熔炼金属
    Applied Metal
    金/K金/银/铜等
    Gold / K- gold / Silver / Copper and etc.
    冷却
    Cooling
    自来水/冷水机
    Running water/ chiller

    Baidu
    sogou